首页 | 本学科首页   官方微博 | 高级检索  
     

小颗粒油母页岩成型工艺研究
引用本文:刘晓,韩冬云,曹祖宾,李丹东,石微微. 小颗粒油母页岩成型工艺研究[J]. 矿产综合利用, 2012, 0(2): 53-56
作者姓名:刘晓  韩冬云  曹祖宾  李丹东  石微微
作者单位:辽宁石油化工大学石油化工学院,辽宁 抚顺,113001
摘    要:对桦甸小颗粒页岩尾矿进行了工业分析和铝甑成分组成分析,表明小颗粒页岩中含挥发分27.48%,含油12.08%。通过反复试验,研制出适应于小颗粒页岩成型的多元复合粘结剂SN,并确定了成型较佳的工艺配比:复合粘结剂6%,水13%,压力25~30MP,在此工艺条件下,成型页岩的抗碎强度和热稳定性分别能达到90.4%、91.7%,能较好的满足工业化干馏工艺要求。

关 键 词:小颗粒  油母页岩  粘结剂  成型  干馏

Research on the Shaping Processing for Small -size Oil Shale
LIU Xiao , HAN Dong-yun , CAO Zu-bin , LI Dan-dong , SHI Wei-wei. Research on the Shaping Processing for Small -size Oil Shale[J]. Multipurpose Utilization of Mineral Resources, 2012, 0(2): 53-56
Authors:LIU Xiao    HAN Dong-yun    CAO Zu-bin    LI Dan-dong    SHI Wei-wei
Affiliation:(College of Petrochemical Technology,Liaoning University of Petroleum & Chemical Technology,Fushun,Liaoning,China)
Abstract:The small-size oil shale from Huadian was analyzed by Proximate analysis and Fisher Schrader assay.The results showed that it contained 27.48% volatile matter and the yield of shale oil was 12.08%.By repeated experiments,a multielement composite additive suitable for shaping of small-size oil shale was developed,which was named SN,and the optimum formulation(mass fraction)of shaping processing was SN 6%,water 13%,and pressure 25~30MP.Under these conditions,the shattering strength and the thermal stability were 90.4% and 91.7%,respectively.The shaped oil shale met the requirement for dry distillation in industry.
Keywords:Small size  Oil shale  Adhesive  Shaping  Dry distillation
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号