| 仰采综放工作面围岩应力分布特征 |
| |
| 引用本文： | 索永录,刘明亮,杨占国,程书航.仰采综放工作面围岩应力分布特征[J].煤炭技术,2011,30(11). |
| |
| 作者姓名： | 索永录 刘明亮 杨占国 程书航 |
| |
| 作者单位： | 西安科技大学能源学院,西安710054;教育部西部矿井开采及灾害防治重点实验室,西安710054 |
| |
| 基金项目： | 国家自然科学基金资助项目(50574073) |
| |
| 摘 要： | 红会四矿地质条件复杂,综放工作面仰采坡度大,造成煤壁片帮和端面冒顶非常严重,是制约工作面安全高效生产的主要因素之一。采用FLAC3D计算分析了6种不同仰采坡度下工作面围岩应力的分布特征。结果表明,当仰采坡度超过20°时,工作面前方支承压力峰值点加速向煤壁移近,当仰采坡度35°时,支承压力峰值点距煤壁仅1.7 m;煤壁内拉应力区也迅速扩大,2.5 m高处煤壁内拉应力区深度已经达到4.4 m。
|
| 关 键 词： | 仰采综放 应力分布 支承压力 数值模拟 |
Characteristics of Stress Distribution in Surrounding Rock at Uphill Fully Mechanized Caving Face |
| |
| SUO Yong-lu,LIU Ming-liang,YANG Zhan-guo,CHENG Shu-hang.Characteristics of Stress Distribution in Surrounding Rock at Uphill Fully Mechanized Caving Face[J].Coal Technology,2011,30(11). |
| |
| Authors: | SUO Yong-lu LIU Ming-liang YANG Zhan-guo CHENG Shu-hang |
| |
| Affiliation: | SUO Yong-lu1,2,LIU Ming-liang1,YANG Zhan-guo1,CHENG Shu-hang1,2(1.Energy School,Xi'an University of Science and Technology,Xi'an 710054,China,2.Western Key Laboratory of Mine Mining and Disaster Prevention,Ministry of Education,China) |
| |
| Abstract: | Honghui NO.4 Coal Mine has complex geological conditions,the fully-mechanized caving face has uphill steep slope,the rib spalling and end-face fall are very serious.This is one of main factors that restrict the effective production.The face stress and characteristics with six different uphill slope mining is calculated and analyzed by FLAC3D.The results show that,when the overhand slope exceeds 20°,the abutment pressure peaks of face accelerate to move to the coal wall,when the uphill slope reaches 35°,the abutment pressure peak is only 1.7m from the coal wall,the tensile stress within the coal wall is also rapidly expanding,2.5m high tensile stress zones within the coal wall has reached the depth of 4.4m. |
| |
| Keywords: | uphill fully-mechanized caving mining stress distribution abutment pressure numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
