| Pro／E在低压电器产品检验中的应用 |
| |
| 引用本文： | 曾作钦. Pro／E在低压电器产品检验中的应用[J]. 福建质量信息, 2014, 0(1): 53-56 |
| |
| 作者姓名： | 曾作钦 |
| |
| 作者单位： | [1]福建省产品质量检验研究院,福建福州350002 [2]国家低压开关电器产品质量监督检验中心,福建福州350002 |
| |
| 摘 要： | 为了缩短电器产品的试验周期，提高检验效率，给企业提供高效的服务，文中引入专业三维造型软件Pro／E，用于提前完成产品安装工装的设计加工，以母线夹产品为例，依据产品规格及试验要求，利用Pro／E设计了该产品进行短路耐受试验所需的工装，并与母线夹产品进行了组装，与试验断口进行了模拟连接，最后在实际试验中验证了所设计工装的合理性和可靠性。
|
| 关 键 词： | Pro Engineer 造型 母线夹 短路耐受试验 |
Application of Pro/E in the Product Testing for Low-voltage Electrical Apparatus |
| |
| ZENG Zuo-Qin. Application of Pro/E in the Product Testing for Low-voltage Electrical Apparatus[J]. Fujian Quality Information, 2014, 0(1): 53-56 |
| |
| Authors: | ZENG Zuo-Qin |
| |
| Affiliation: | ZENG Zuo-Qin (1 Fujian Inspection and Research Institute for Product Quality, Fuzhou 350002, Fujian, China) (2 National Quality Supervision and Testing Center for Low-voltage Switching Device, Fuzhou 350002, Fujian, China) |
| |
| Abstract: | In order to shorten the test period of electrical products, improve its testing efficiency and provide more efficient service for the enterprise, the professional 3D modeling software Pro/E was introduced in this paper, which was used to finish the designing and processing stage of product installing fixtures in advance. Taking bus-bar clamp product as an example, according to their specification and test requirements, all the fixtures needed in the short-circuit withstand test of the product were designed by Pro/E. Then, these fixtures were assembled with the product, and the assembly part was connected with the testing terminal. Finally, the rationality and reliability of the designed tools were verified in practical tests. |
| |
| Keywords: | Pro/Engineer Modeling Bus-bar Clamp Short-circuit withstand test |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
