| 楔横轧变形载荷的计算 |
| |
| 引用本文： | 白志斌,任广升,张承鉴.楔横轧变形载荷的计算[J].吉林大学学报(工学版),1989(3). |
| |
| 作者姓名： | 白志斌 任广升 张承鉴 |
| |
| 作者单位： | 吉林工业大学辊锻工艺研究所
(白志斌，任广升)，吉林工业大学辊锻工艺研究所(张承鉴) |
| |
| 摘 要： | 本文通过对楔横轧变形原理及接触形式的分析,推导了轧制过程中接触区的螺旋面方程,提出了楔横轧变形接触面积及变形载荷的求解方法,计算结果与实测值相符。文章分析了工艺参数对变形载荷的影响,定量地解释了各影响曲线的变化趋势。研究结果对楔横轧金属变形的理论研究及工程应用有一定的参考价值。
|
| 关 键 词： | 楔横轧变形 螺旋面 载荷 |
The Calculation of Deformation Load on Cross Wedge Rolling |
| |
| Bai Zhibin Ren Guangsheng Zhang CJiengjian.The Calculation of Deformation Load on Cross Wedge Rolling[J].Journal of Jilin University:Eng and Technol Ed,1989(3). |
| |
| Authors: | Bai Zhibin Ren Guangsheng Zhang CJiengjian |
| |
| Affiliation: | Bai Zhibin Ren Guangsheng Zhang CJiengjian |
| |
| Abstract: | The equation of helicoid in contact area on rolling was deduced thraugh analysing the characteristics of deformation in the process of cross wedge rolling in this paper. The calculating method for the contact area and the deformation load was proposed and the numerical values of deformation load match the experiments.The influence of technological parameters on the deformation load was analysed in detail. The research results are of important value to the theoritical research and engineering application of metal deformation. |
| |
| Keywords: | cross wedge rolling load helicoid |
| 本文献已被 CNKI 等数据库收录！ |
