| 采用Vb．net实现Solid Edge中零件信息的集成研究 |
| |
| 引用本文： | 蒋宏春,杨晓红.采用Vb．net实现Solid Edge中零件信息的集成研究[J].矿山机械,2008,36(2):55-57,58. |
| |
| 作者姓名： | 蒋宏春 杨晓红 |
| |
| 作者单位： | 华北电力大学机械工程系,河北保定071003 |
| |
| 摘 要： | 以SolidEdge为平台建立零件的几何模型，添加其尺寸以及上下偏差，在三维建模阶段通过Vb．net开发的一系列向导界面完成零件的管理特征、粗糙度特征、形位精度特征信息的添加，从而在同一个零件文档中存储零件的比较完整的工程信息。为后续的CAPP和CAM的信息识别与提取提供方便。
|
| 关 键 词： | Solid Edge 管理特征 形位公差 |
| 文章编号： | 1001-3954（2008）02-0055-058 |
| 收稿时间： | 2007-08-01 |
| 修稿时间： | 2007-09-05 |
Integration of Part Information Based on Vb.net |
| |
| JIANG Hongchun, YANG Xiaohong.Integration of Part Information Based on Vb.net[J].Mining & Processing Equipment,2008,36(2):55-57,58. |
| |
| Authors: | JIANG Hongchun YANG Xiaohong |
| |
| Abstract: | The geometric model of a part is built based on Solid Edge. And the dimensions and their upper and low deviations of tolerance are added. The management feature of the part, roughness feature and form and position precision feature is completed by interfaces developed by VB.net during the 3Ds modeling period, which results that more complete engineering information is conserved in the single of same part document. Consequently it is provided in convenience for the further information identifying and abstraction in the CAPP and CAM. |
| |
| Keywords: | Solid Edge Management Feature Form and position tolerance |
| 本文献已被 维普 等数据库收录！ |
