Mechanistic modeling of five-axis machining with a general end mill considering cutter runout

The accurate and fast prediction of cutting forces in five-axis milling of free-form surfaces remains a challenge due to difficulties in determining the varying cutter-workpiece engagement (CWE) boundaries and the instantaneous uncut chip thickness (IUCT) along the tool path. This paper proposes an approach to predict the cutting forces in five-axis milling process with a general end mill considering the cutter runout effect that is inevitable in the practical machining operations. Based on the analytical model of cutting edge combined with runout parameters, the expression of the rotary surface formed by each cutting edge undergoing general spatial motion is firstly derived. Then by extracting the feasible contact arc along the tool axis, a new arc-surface intersection method is developed to determine the CWE boundaries fast and precisely. Next, the circular tooth trajectory (CTT) model is developed for the calculation of the IUCT with a slight sacrifice of accuracy. In comparison with the true IUCT calculated by the trochoidal tooth trajectory model, the approximation error introduced by the circular assumption is negligible while the computational efficiency improves a lot. Finally, combining with the calibrated cutting coefficients and runout parameters, comprehensive formulation of the cutting force system is set up. Simulations and experimental validations of a five-axis flank milling process show that the novel CTT model possesses obvious advantages in computing efficiency and accuracy over the existing approaches. Rough machining of a turbo impeller is further carried out to test the practicability and effectiveness of the proposed mechanistic model.