Friction compensation controller for load varying machine tool feed drive |
| |
Affiliation: | 1. Department of Mechanical Engineering, Yonsei University, Seoul 120-749, Republic of Korea;2. School of Mechanical Engineering, Kyungpook National University, Daegu 702-701, Republic of Korea |
| |
Abstract: | The load applied to a machine tool feed drive changes during the machining process as material is removed. This load change alters the Coulomb friction of the feed drive. Because Coulomb friction accounts for a large part of the total friction the friction compensation control accuracy of the feed drives is limited if this nonlinear change in the applied load is not considered. This paper presents a new friction compensation method that estimates the machine tool load in real time and considers its effect on friction characteristics. A friction observer based on a Kalman filter with load estimation is proposed for friction compensation control considering the applied load change. A specially designed feed drive testbed that enables the applied load to be modified easily was constructed for experimental verification. Control performance and friction estimation accuracy are demonstrated experimentally using the testbed. |
| |
Keywords: | Adaptive friction compensation Feed drive load Machine tool control Workpiece weight |
本文献已被 ScienceDirect 等数据库收录! |