首页 | 本学科首页   官方微博 | 高级检索  
     

混合驱动五杆机构的构型和连杆曲线变化规律的研究
引用本文:李辉,孟宪举,张岳文.混合驱动五杆机构的构型和连杆曲线变化规律的研究[J].机械科学与技术(西安),2003,22(6):962-965.
作者姓名:李辉  孟宪举  张岳文
作者单位:[1]天津大学机械工程学院,天津300072 [2]唐山钢铁股份有限公司,唐山063000
摘    要:从分析平面五杆机构的相对杆长关系入手 ,给出了平面五杆机构可装配条件及五杆机构中周转副存在的充要条件 ,并据此对平面五杆机构的构型进行了分析 ,得出了平面五杆机构中无条件三曲柄、无条件双曲柄、曲柄摇杆机构、双摇杆机构存在的条件 ;并借助于计算机机构仿真的方法 ,研究了双曲柄混合输入五杆机构的连杆曲线随机构尺寸参数和运动参数变化的新规律。

关 键 词:五杆机构  连杆曲线  混合机构  计算机仿真
文章编号:1003-8728(2003)06-0962-04
修稿时间:2001年11月26

Investigation on the Type and Variation of Coupler Curve of Hybrid Five-bar Linkage
LI Hui ,MENG Xian-ju ,ZHANG Yue-wen.Investigation on the Type and Variation of Coupler Curve of Hybrid Five-bar Linkage[J].Mechanical Science and Technology,2003,22(6):962-965.
Authors:LI Hui  MENG Xian-ju  ZHANG Yue-wen
Affiliation:LI Hui 1,MENG Xian-ju 1,ZHANG Yue-wen 2
Abstract:Based on the analysis of the link length of a planar five-bar, the assemblability of linkage and the sufficient and necessary condition of the existence of full revolvable joint are proposed. Then, the type of the planar five-bar linkage is analyzed. The existence condition of unconditional triple crank, unconditional double crank, unconditional crank-rocker and double rocker are derived. Based on computer mechanism simulation, the coupler curve of a hybrid five-bar linkage with double crank are investigated and some laws of coupler curve are derived for the first time.
Keywords:Five-bar linkage  Coupler curve  Hybrid mechanism  Computer simulation
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号