基于MoldFlow的模具浇口设计 |
| |
引用本文: | 王波,石山. 基于MoldFlow的模具浇口设计[J]. 模具制造, 2013, 13(8): 56-58 |
| |
作者姓名: | 王波 石山 |
| |
作者单位: | 1. 空军工程大学航空航天工程学院,陕西西安710038;西安航空职业技术学院,陕西西安710089 2. 空军工程大学航空航天工程学院,陕西西安,710038 |
| |
摘 要: | MoldFlow Plastic Advisers(MPA)注射模分析模拟软件,可以接受从任何CAD软件如UG、Pro/E输出的实体造型,同时又独立于这些CAD软件,处于独立平台的塑料CAE软件,它不但可以对设计方案进行优化,而且对设计时疏漏的一些问题,MPA也会发现它们,并提醒注意。本文以塑料窗限位块为例,利用MPA对该塑件的模具浇口进行优化设计,为注射模设计提供合理的参考。
|
关 键 词: | MPA 塑料窗限位块 浇口 分析 设计 |
Mold Gate Design Based on MoldFlow Software |
| |
Abstract: | MoldFlow Plastic Advisers (MPA) injection molding simulation software, can accept from any CAD software (such as: UG,Pro/E) solid modeling output, at the same time, independent of the CAD software, in a platform independent plastic CAE software, it can not only optimize the scheme of you, and on some of the problems you omissions at design time, MPA will find them, and remind you of. Based on the plastic window limit block as an example, using MPA to optimize the design of the mold gate, provide a reasonable reference for the injection mold plastic products plan. |
| |
Keywords: | MPA plastic window limit block gate analysis design |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|