| 齿轮动态力研齿机理及实验研究 |
| |
| 引用本文： | 白明光,王超然.齿轮动态力研齿机理及实验研究[J].北京机械工业学院学报,1998,13(2):17-23. |
| |
| 作者姓名： | 白明光 王超然 |
| |
| 作者单位： | 北京机械工业学院机械工程系，北京机械工业学院机械工程系，北京机械工业学院机械工程系，北京机械工业学院机械工程系，北京机械工业学院机械工程系 |
| |
| 摘 要： | 对渐开线齿轮动态力研齿机理进行了理论分析和实验研究。基于以研代磨的设想，齿轮动态力研齿将研磨工艺用于硬齿面的精加工，其加工原理为：两工件齿轮（两被研齿轮）在空载下以确定的速比（两齿轮的齿数比），在大转动惯量下高速稳态运转，研齿时保持两齿轮的速比不变，并周期改变两齿轮中心距，利用齿轮啮合时，齿轮本身误差产生的齿面动态力，在研磨剂的作用下，修正齿轮误差达到两齿轮提高精度的目的。
|
| 关 键 词： | 渐开线齿轮 动态力 研齿 齿轮 |
STUDY OF THE MECHANISM AND EXPERIMENT ON THE DYNAMIC MUTUAL LAPPING OF GEARS |
| |
| Bai Mingguan,Wang Chaoran,Yao Wenxi,Zhang Huaicun,Han Qiushi.STUDY OF THE MECHANISM AND EXPERIMENT ON THE DYNAMIC MUTUAL LAPPING OF GEARS[J].Journal of Beijing Institute of Machinery,1998,13(2):17-23. |
| |
| Authors: | Bai Mingguan Wang Chaoran Yao Wenxi Zhang Huaicun Han Qiushi |
| |
| Affiliation: | Bai Mingguan,Wang Chaoran,Yao Wenxi,Zhang Huaicun,Han Qiushi Department of Mechanical Engineering,Beijing Institute of Machinery,Beijing 100085 |
| |
| Abstract: | A thorough study for the mechanism of the involute gear lapping with dynamic force was made in theory and test.Based on the view of using lapping instead of abrasion,the ma- chining principle of the involute gear lapping with the dynamic force is:when two gears op- erate stablly at high velocity(definite speed ratio,i.e.,the ratio of two gears teeth)with great intertia,chang their center distance periodically,the gears error can be modified by the dynamic force and abrasive,so higher accuracy of the double can be achieved. |
| |
| Keywords: | involute gear dynamic force gear lapping |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
