| 镁合金拼焊板冲压成形过程数值模拟 |
| |
| 引用本文： | 王忠堂,钱芳. 镁合金拼焊板冲压成形过程数值模拟[J]. 锻压技术, 2008, 33(6) |
| |
| 作者姓名： | 王忠堂 钱芳 |
| |
| 作者单位： | 沈阳理工大学,材料科学与工程学院,辽宁,沈阳,110168;沈阳理工大学,材料科学与工程学院,辽宁,沈阳,110168 |
| |
| 基金项目： | 国家自然科学基金资助项目(50775211) |
| |
| 摘 要： | 借助MSC-Marc模拟软件，采用大变形弹塑性有限元法，建立了镁合金拼焊板筒形件冲压成形有限元模型，对相同厚度、不同成分的镁合金拼焊板冲压成形过程进行了数值模拟。得到了筒形件底部及侧壁法兰处焊缝移动规律；分析了压边力及板料初始温度对焊缝移动情况的影响。对于拼焊板冲压成形的研究具有一定意义。
|
| 关 键 词： | 镁合金 拼焊板 冲压 数值模拟 |
Numerical simulation of magnesium alloy tailor-welded blank drawing |
| |
| WANG Zhong-tang,QIAN Fang. Numerical simulation of magnesium alloy tailor-welded blank drawing[J]. Forging & Stamping Technology, 2008, 33(6) |
| |
| Authors: | WANG Zhong-tang QIAN Fang |
| |
| Abstract: | Using MSC.Marc simulating software and adopting large elastic-plasticity finite element method(FEM),the model of magnesium alloy tailor-welded blank tube parts was established.The forming process was simulated.The effect of fixed holder force and initial temperature of blanks on the movement of welded seam of TWB with diffident materials and the same thickness was analyzed.The motional law of the weld seam on the bottom of the cup and the side wall was gained.The results might be significant for magnesium a... |
| |
| Keywords: | magnesium alloy tailor-welded blanks drawing numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
