| 激光熔覆石化阀门密封面熔覆层裂纹控制的研究 |
| |
| 引用本文： | 王新林,漆海滨,石世宏.激光熔覆石化阀门密封面熔覆层裂纹控制的研究[J].激光技术,2002,26(5):359-363. |
| |
| 作者姓名： | 王新林 漆海滨 石世宏 |
| |
| 作者单位： | 1.南华大学电气工程学院, 衡阳, 421001; |
| |
| 基金项目： | 湖南省自然科学基金项目 |
| |
| 摘 要： | 采用5kW横流CWCO2激光器,对不同基体材料的石化高参数阀门密封面进行激光熔覆,所用合金粉末为CoCrWB与NiCrFeBSi合金粉末。在研究解决了厚层单道熔覆裂纹问题基础上,得到了厚2mm～3.5mm,表面平整、无质量缺陷的激光熔覆层。结合激光熔覆阀门零件的试验研究,分析探讨了影响熔覆层,特别是厚层熔覆层裂纹形成的各种因素及其综合影响,提出了关于建立判断熔覆层裂纹形成的应力判据模型的思路。
|
| 关 键 词： | 激光熔覆 石化阀门密封面 熔覆层裂纹 应力判据 |
| 文章编号： | 1001-3806(2002)05-0359-05 |
| 收稿时间： | 2001/7/12 |
| 修稿时间： | 2001年7月12日 |
Study on crack control of layer during laser cladding sealing surface of petrochemical valves |
| |
| Wang Xinlin ,Qi Haibin ,Shi Shihong.Study on crack control of layer during laser cladding sealing surface of petrochemical valves[J].Laser Technology,2002,26(5):359-363. |
| |
| Authors: | Wang Xinlin Qi Haibin Shi Shihong |
| |
| Affiliation: | Wang Xinlin 1,Qi Haibin 2,Shi Shihong 3 |
| |
| Abstract: | This paper investigates laser cladding the sealing surface of high parameter petrochemical valves with 5kW transverse flow CW CO2 laser.The base metal of valves is various,and the cladding powder is CoCrWB or NiCrFeBSi powder.A 2mm～3.5mm thick layer of laser cladding with smooth surface and non flaw can be made,based on solution of crack problem of cladding layer by a single scanning and thick cladding.Various elements and their interaction which influence the formation of crack in laser cladding layer,especially of thick layer,and control of crack are discussed and analyzed according to the experiments.The thought of building a model of stress judgement to judge the formation of crack in cladding layer is put forward. |
| |
| Keywords: | laser cladding sealing surface of petrochemical valve crack of cladding layer stress judgement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《激光技术》浏览原始摘要信息 |
|
点击此处可从《激光技术》下载全文 |
|
