首页 | 本学科首页   官方微博 | 高级检索  
     

弧焊电源的建模与仿真研究
引用本文:张巍钟,滕青芳,孔令刚,詹平红.弧焊电源的建模与仿真研究[J].电力电子技术,2007,41(11):100-102.
作者姓名:张巍钟  滕青芳  孔令刚  詹平红
作者单位:兰州交通大学,甘肃,兰州,730070;兰州交通大学,甘肃,兰州,730070;兰州交通大学,甘肃,兰州,730070;兰州交通大学,甘肃,兰州,730070
摘    要:采用状态空间平均法建立了全桥逆变式弧焊电源主回路的平均状态方程,经过线性化处理推导出频域小信号模型.并在MATLAB环境下,利用频域法分析主回路的动态性能,得到的仿真结果与实验结论相一致.对开关电源的理论分析和设计具有一定的参考价值.

关 键 词:弧焊电源  仿真/小信号模型
文章编号:1000-100X(2007)11-0100-03
修稿时间:2007-07-06

Modeling and Simulation of Arc Welding Power
ZHANG Wei-zhong,TENG Qing-fang,KONG Ling-gang,ZHAN Ping-hong.Modeling and Simulation of Arc Welding Power[J].Power Electronics,2007,41(11):100-102.
Authors:ZHANG Wei-zhong  TENG Qing-fang  KONG Ling-gang  ZHAN Ping-hong
Affiliation:Lanzhou Jiaotong University, Lanzhou 730070, China
Abstract:The paper introduces the dynamic characteristic and the structure of arc welding power,and gives a method of designing arc welding power which using DSP chip as a controller.The main circuit of bridge invert arc welding power is presented,which applies the state space averaging approach in modeling the system,and develops the small signal model by linearizing the state equation.Transfer functions is derived from the math model of the system as well as dynamic char-acteristics is studied with MATLAB,and the simulation result is consistent with experiment.Conclusion is given,which is useful for analyzing and designing switching power supply.
Keywords:arc welding power  simulation/small signal mode
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号