| 可控硅移相触发模块设计 |
| |
| 引用本文： | 冯平,巫世远. 可控硅移相触发模块设计[J]. 广西工学院学报, 2006, 17(3): 101-104 |
| |
| 作者姓名： | 冯平 巫世远 |
| |
| 作者单位： | 广西工学院,电子信息与控制工程系,广西,柳州,545006 |
| |
| 摘 要： | 对电力电子技术实验设备中由K J004组成的触发器件提出一种新的设计,用M CS51系列单片机设计的一种单相桥式触发模块,采用单片机控制并显示所要导通的导通角,通过D/A转换得出K J004触发器件的移相控制信号,以实现其移相控制电压目的。系统设计电路简单,容易实现,成本低。极大地提高晶闸管导通角控制精度,方便使用。
|
| 关 键 词： | KJ004集成触发器件 MCS系列单片机 同步信号 移相触发 |
| 文章编号： | 1004-6410（2006）03-0101-04 |
| 收稿时间： | 2006-06-20 |
| 修稿时间： | 2006-06-20 |
Module design for silicon-controlled phase-shift trigger |
| |
| FENG Ping,WU Shi-yuan. Module design for silicon-controlled phase-shift trigger[J]. Journal of Guangxi University of Technology, 2006, 17(3): 101-104 |
| |
| Authors: | FENG Ping WU Shi-yuan |
| |
| Affiliation: | Department of Electronic Information and Control Engineering, Guangxi University of Technology, Liuzhou 545006 ,China |
| |
| Abstract: | A new design of integrated trigger device constituted by KJ004 and used in electric.The new device is a single-phase bridge trigger module by the use of a MCSS51 series chip microprocessor,with chip microprocessor control to display the conduction angle to be conducted,and with D/A conversion to obtain the phase-shift control signal from KJ trigger device,thus achieving its aim of phase-shift voltage control.The system is simple in circuit design,feasible and cheaper.electronic laboratory facilities is presented to improve tremendously the conducting control accuracy of conduction and make easier for use. |
| |
| Keywords: | KJ004 integrated trigger device MCS series chip microprocessor synchronizing signal phase-shift Trigger |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
