| 螺纹结构在定模的注射模设计 |
| |
| 引用本文： | 温煌英.螺纹结构在定模的注射模设计[J].模具制造,2011(7):59-62. |
| |
| 作者姓名： | 温煌英 |
| |
| 作者单位： | 东莞南博职业技术学院,广东东莞,523000 |
| |
| 摘 要： | 介绍了螺纹结构在定模的模具设计方法,而驱动螺纹的马达安装在动模,采用点浇从内部进胶。虽然增加了模具设计及加工的难度,成本也相应增加,但生产出来的塑件品质非常优异。
|
| 关 键 词： | 定模螺纹 注射模设计 点浇口 内部进胶 |
Design of Injection Mold with Thread Structure in Fixed Mold |
| |
| Abstract: | Introduced design of injection mold with thread structure in fixed mold,the drive motor was installed in moving mold,using point poured from the inside. Although increased the difficulty of mold design and processing,cost is also increased accordingly,but produce product quality is very good. |
| |
| Keywords: | thread structure in fixed mold injection mold design point gate inner injecting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
