Finite element analysis of creep fracture initiation in a model superalloy material

Detailed finite element analyses were performed for a single edge-cracked specimen geometry under both plane stress and plane strain constraint for a superalloy material that obeys a power-law creep relationship. The objectives of these analyses were to elucidate the stationary creep crack-tip fields and to provide guidance for the experimental measurement of crack-tip deformations. New results demonstrate that, for both plane stress and plane strain, the angular variations in the creep strain fields do not agree with HRR-type predictions, although the radial variations are in agreement with HRR-type creep strain field predictions in a zone very near the crack tip. Thus, the use of experimental measurement of surface displacement and/or strain data for the location of HRR-type fields may not be possible, unless modifications to the existing HRR-type theory are made. It is also noted that the size of the stress-based HRR-dominance zone is only a fraction of the creep zone size in plane stress, and is very small (especially along =0°) compared to the creep zone size in plane strain. Furthermore, the dominance of the singular strain fields are at least two orders of magnitude smaller than the corresponding stress dominance zones. As such, unless the microstructural features of the material are smaller than the dimensions of the dominance zones, the basis for using stress or strain-based fracture parameters derived from the HRR-type fields for prediction of creep fracture initiation is unclear.