| 制作工艺对复合材料胶-螺混合连接接头传力机理及承载力的影响分析 |
| |
| 引用本文： | 马毓,江克斌,赵启林.制作工艺对复合材料胶-螺混合连接接头传力机理及承载力的影响分析[J].机械强度,2011,33(1):99-105. |
| |
| 作者姓名： | 马毓 江克斌 赵启林 |
| |
| 作者单位： | 1. 解放军理工大学,工程兵工程学院,南京,210007;77126部队,重庆,402551
2. 解放军理工大学,工程兵工程学院,南京,210007 |
| |
| 基金项目： | 国家自然科学基金资助项目(50608069)~~ |
| |
| 摘 要： | 根据制作过程中胶层固化的时机,复合材料胶-螺混合连接接头可分为两种制作工艺.目前对两种工艺制作的胶-螺混合连接接头的研究中均存在传力机理不清,缺乏承载力计算方法等问题.对于两种工艺所制作的胶-螺混合连接接头,对比分析其承载变形过程中传力机理及胶-螺之间变形协调条件的差异.基于接头的传力机理及胶-螺之间的变形协调条件,分...
|
| 关 键 词： | 复合材料 胶-螺混合连接接头 制作工艺 传力机理 胶-螺变形协调条件 承载力 |
ANALYSIS OF THE IMPACT OF THE FABRICATION TECHNICAL PROCESS ON THE LOAD TRANSFER MECHANISM AND CARRYING CAPACITY OF THE BONDED-BOLTED HYBRID COMPOSITE JOINTS |
| |
| MA Yu,JIANG KeBin,ZHAO QiLin.ANALYSIS OF THE IMPACT OF THE FABRICATION TECHNICAL PROCESS ON THE LOAD TRANSFER MECHANISM AND CARRYING CAPACITY OF THE BONDED-BOLTED HYBRID COMPOSITE JOINTS[J].Journal of Mechanical Strength,2011,33(1):99-105. |
| |
| Authors: | MA Yu JIANG KeBin ZHAO QiLin |
| |
| Affiliation: | MA Yu1,2 JIANG KeBin1 ZHAO QiLin1(1.Engineering Institute of Corps of Engineers,PLA University of Science and Technology,Nanjing 210007,China)(2.No.77126 of PLA,Chongqing 402551,China) |
| |
| Abstract: | The bonded-bolted hybrid composite joints have two fabrication technical process,according to the curdling time of the adhesive layer.The load transfer mechanism and the carrying capacity calculation methods are indistinct for them,which fabricated by the two fabrication technical process.Aimed at this problem,described the load transfer mechanism and the bonded-bolted deformation harmony condition of the two kind joints,analysed their difference,utilized the load transfer mechanism and the bonded-bolted de... |
| |
| Keywords: | Composites Bonded-bolted hybrid joints Fabrication technical process Load transfer mechanism Bonded-bolted deformation harmony condition Carrying capacity |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
