| 1310nm FP TO-CAN偏心封装耦合效率的研究 |
| |
| 引用本文： | 孟海杰,刘加勇,张振峰,周忠华,丁国庆. 1310nm FP TO-CAN偏心封装耦合效率的研究[J]. 光通信研究, 2012, 38(2): 56-58 |
| |
| 作者姓名： | 孟海杰 刘加勇 张振峰 周忠华 丁国庆 |
| |
| 作者单位： | 武汉华工正源光子技术有限公司,湖北武汉,430223 |
| |
| 摘 要： | 文章应用ZEMAX软件模拟了管芯与光纤在不同偏移量下的耦合效率,并进行了实验验证.结果表明,6.5 mm焦距的TO-CAN(晶体管外壳封装)与端面倾斜8°的光纤,在管芯偏移100μm时,耦合效率最大,模拟值为21.9％,实验值为21.32％；5.8 mm焦距的TO-CAN与端面倾斜6°的光纤,在管芯偏移80 μm时,耦...
|
| 关 键 词： | 法布里-珀罗激光器 晶体管外壳封装 耦合效率 管芯偏移 光纤 |
| 收稿时间： | 2011-09-16 |
Study on the coupling efficiency of chip offset of 1 310 nm FP TO-CAN |
| |
| Meng Haijie , Liu Jiayong , Zhang Zhenfeng , Zhou Zhonghua , Ding Guoqing. Study on the coupling efficiency of chip offset of 1 310 nm FP TO-CAN[J]. Study on Optical Communications, 2012, 38(2): 56-58 |
| |
| Authors: | Meng Haijie Liu Jiayong Zhang Zhenfeng Zhou Zhonghua Ding Guoqing |
| |
| Affiliation: | (Wuhan Huagong Genuine Optics Technology Co.,Ltd.,Wuhan 430223,China) |
| |
| Abstract: | Using ZEMAX software,the coupling efficiencies between laser chip and fiber at different offsets are simulated and experimentally verified. The results show that when the chip offset is 100 μm,the coupling efficiency between the TO-CAN with 6.5 mm focal length and 8 ° fiber is the maximum: the simulation value is 21.9% and the experimental value is 21.32%, and when the chip offset is 80 μm,the coupling efficiency between TO-CAN with 5.8 mm focal length and 6 ° fiber is the maximum: the simulation value is 11.2% and the experimental value is 10.42%.In both cases, the experimental results are consistent with the simulation results, which has a certain guiding significance to laser subassembly packaging. |
| |
| Keywords: | Fabry-Perot laser TO-CAN coupling efficiency chip offset fiber |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
