首页 | 本学科首页   官方微博 | 高级检索  
     

高浓度纺丝油剂废水预处理工程实践
引用本文:李红良,沈富强,张爱国,王秀华,吴成强.高浓度纺丝油剂废水预处理工程实践[J].工业水处理,2012,32(6):83-85.
作者姓名:李红良  沈富强  张爱国  王秀华  吴成强
作者单位:1. 浙江理工大学材料与纺织学院,浙江杭州310018;桐昆集团浙江恒通化纤有限公司,浙江桐乡314513
2. 桐昆集团浙江恒通化纤有限公司,浙江桐乡,314513
3. 浙江工业大学生物与环境工程学院,浙江杭州,310032
4. 浙江理工大学材料与纺织学院,浙江杭州,310018
基金项目:浙江省自然科学基金资助项目
摘    要:介绍了浙江省某集团化纤有限公司油剂废水预处理工程的设计、调试及运行结果。采用隔油+Fenton氧化+混凝沉淀工艺处理高浓度纺丝油剂废水(COD<30g/L),COD去除率达到了70%以上,油去除率达到了83%。工程实践表明,该预处理工艺能够有效地破乳、沉淀去除该废水中的油污和有机物;当操作参数控制适宜时,处理效率稳定。

关 键 词:纺丝油剂废水  Fenton氧化  混凝

Pretreatment practice of high concentration of spinning oil wastewater
Li Hongliang , Shen Fuqiang , Zhang Aiguo , Wang Xiuhua , Wu Chengqiang.Pretreatment practice of high concentration of spinning oil wastewater[J].Industrial Water Treatment,2012,32(6):83-85.
Authors:Li Hongliang  Shen Fuqiang  Zhang Aiguo  Wang Xiuhua  Wu Chengqiang
Affiliation:1.School of Materials and Textiles,Zhejiang Sci-Tech University,Hangzhou 310018,China;2.College of Biological and Environmental Engineering,Zhejiang University of Technology,Hangzhou 310032,China;3.Tongkun Group Zhejiang Hengtong Chemical Fiber Limited Company,Tongxiang 314513,China)
Abstract:The process design,debugging and operation effect of spinning oil wastewater pretreatment project in a chemical fiber company are introduced.The combined process,separation+Fenton oxidation+coagulation precipitation,has been used for treating the spinning oil wastewater whose COD is lower than 30 g/L.Its COD removing rate reaches 70% and oil removal rate 83%.The engineering practice shows that this pretreatment process could efficiently remove COD and oil from the spinning wastewater by demulsification and coagulation precipitation.The treatment efficiency is stable,when the operation parameters are controlled suitably.
Keywords:spinning oil wastewater  Fenton oxidation  coagulation
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号