首页 | 本学科首页   官方微博 | 高级检索  
     

基于TMS320VC 5509 DSP片内USB接口的数据通信
引用本文:冷华,李欣然,李志军,李村晓.基于TMS320VC 5509 DSP片内USB接口的数据通信[J].电力自动化设备,2007,27(7):87-89,105.
作者姓名:冷华  李欣然  李志军  李村晓
作者单位:湖南大学电气与信息工程学院,湖南,长沙410082
摘    要:采用通用串行总线(USB)用于数据信号处理(DSP)数据采集系统和后台PC机之间的大容量实时数据传输。以TMS320VC 5509 DSP芯片为基础,利用DSP芯片内部的USB模块,设计了硬件接口电路和控制软件,给出了相应的接口框图和关键代码。结合Visual C 6.0和开发平台Code Composer Studio实现了USB模块的固件设计,利用Driver Studio开发了后台PC机Windows客户驱动程序。所设计的系统已成功地应用于变电站现场的数据实时采集,满足数据采集的快速性和实时性要求。

关 键 词:USB  TMS320VC  5509  驱动程序  数据通信  负荷特性  数据采集
文章编号:1006-6047(2007)07-0087-03
收稿时间:2006-07-24
修稿时间:2006-07-242007-01-12

Data communication based on USB interface of TMS320VC 5509 DSP
LENG Hu,LI Xin-ran,LI Zhi-jun,LI Cun-xiao.Data communication based on USB interface of TMS320VC 5509 DSP[J].Electric Power Automation Equipment,2007,27(7):87-89,105.
Authors:LENG Hu  LI Xin-ran  LI Zhi-jun  LI Cun-xiao
Affiliation:College of Electrical and Information Engineering,Hunan University,Changsha 410082,China
Abstract:USB(Universal Serial Bus) is used in real-time mass data transfer between backstage PC and DSP-based data acquisition system.Using the internal USB module of TMS320VC 5509 DSP chip,the hardware interface circuit and control software are designed and the corresponding interface diagram and key codes are provided.The firmware of USB module is programmed with Visual C 6.0 on Code Composer Studio and the Windows driver is developed with Driver Studio in backstage PC.The system designed is successfully used in substation for real-time data acquisition,meeting requirements of speed and real-time performance.
Keywords:USB  TMS320VC 5509  driver  data communication  load characteristic  data acquisition
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《电力自动化设备》浏览原始摘要信息
点击此处可从《电力自动化设备》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号