|
|||||
|
|
| 氧化锌晶须改善轮胎胎面胶耐磨性能的研究 | |
| 引用本文： | 周祚万,樊建强,张再昌,李冬.氧化锌晶须改善轮胎胎面胶耐磨性能的研究[J].轮胎工业,2002,22(8):481-483. |
| 作者姓名： | 周祚万 樊建强 张再昌 李冬 |
| 作者单位： | 1. 西南交通大学高分子材料研究所,四川成都,610031 2. 四川轮胎橡胶,集团,股份有限公司,四川简阳,641400 3. 四川省低维复合材料工程技术研究中心,四川成都,610031 |
| 摘 要： | 研究了采用氧化锌晶须改善轿车子午线轮胎胎面胶的耐磨性能。试验结果表明，在胎面胶配方中加入3份左右氧化锌晶须，可使硫化胶的磨耗量减小约23％。145SR12LT规格样胎于100％负荷下运行110h尚完好。其作用机理在于氧化锌晶须具有各向同性增强效果，可较好地分散因磨损而产生的热量，且四针状体连接于同一中心，能较好地协同发挥作用。 |
| 关 键 词： | 氧化锌晶须 胎面胶 耐磨性能 轮胎 |
| 文章编号： | 1006-8171(2002)08-0481-03 |
| 修稿时间： | 2002年3月26日 |
Improving abrasion resistance of tread compound with zinc oxide whiscker |
|
| ZHOU Zuo-wan,FAN Jian-qiang,ZHANG Zai-chang and LI Dong.Improving abrasion resistance of tread compound with zinc oxide whiscker[J].Tire Industry,2002,22(8):481-483. | |
| Authors: | ZHOU Zuo-wan FAN Jian-qiang ZHANG Zai-chang and LI Dong |
| Abstract: | The zinc oxide whiscker was used to improve the abrasion resistance of tread compound for radial car tire.It was found through the test that the abrasion loss of vulcanizate reduced by 23% and the test 145SR 12LT tire kept perfect after running for 110 h under 100% load by adding 3 phr of zinc oxide whiscker in the tread compound.The mechanism could be explained by the fact that the heat generated from abrasion could be well dispersed because of the isotropic reinforcing effect of zinc oxide whiscker;and the tetrapod structure of zinc oxide whiscker could exert synergistic action because its four feet joined at the same center. |
| Keywords: | zinc oxide whiscker tread compound abrasion resistance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《轮胎工业》浏览原始摘要信息 | |
| 点击此处可从《轮胎工业》下载全文 | |