| 一种大口径战斗部分步压装药有限元模拟与实验 |
| |
| 引用本文： | 李琳琳,张欲立,张宏光,徐恒秋,常东.一种大口径战斗部分步压装药有限元模拟与实验[J].兵工自动化,2011,30(5):72-73. |
| |
| 作者姓名： | 李琳琳 张欲立 张宏光 徐恒秋 常东 |
| |
| 作者单位： | 长春设备工艺研究所装药研究室;长春市建筑职工业余大学建筑系; |
| |
| 摘 要： | 为提高大口径弹药分步压装药效率,对某大口径战斗部分步压装药进行有限元模拟与实验。根据分步压装特点制定针对某大口径战斗部的分步压装工艺流程,采用ANSYS有限元模拟方法分析装药过程中弹壁与导爆管与变形受力情况,开展工艺试验制定工艺参数,采用相应的工艺参数进行大口径战斗部分步压装高能炸药。结果表明,装填结果完全满足××大口径战斗部的装药质量要求。
|
| 关 键 词： | 分步压装药 有限元模拟 装药 |
| 收稿时间： | 2013/1/21 0:00:00 |
Finite Element Simulation and Experimental Study of A Large Caliber Fighting Part of Procedure Press-Load Detonator |
| |
| Li Linlin,Zhang Yuli,Zhang Hongguang,Xu Hengqiu,Chang Dong.Finite Element Simulation and Experimental Study of A Large Caliber Fighting Part of Procedure Press-Load Detonator[J].Ordnance Industry Automation,2011,30(5):72-73. |
| |
| Authors: | Li Linlin Zhang Yuli Zhang Hongguang Xu Hengqiu Chang Dong |
| |
| Affiliation: | Li Linlin1,Zhang Yuli1,Zhang Hongguang1,Xu Hengqiu1,Chang Dong2(1.Explosives Charge Research Office,Institute of Changchun Equipment Technology,Changchun 130012,China,2.Dept.of Construction,University of Amateur Construction Workers of Changchun,Changchun 130041,China) |
| |
| Abstract: | To improve efficiency of procedure press-load detonator about large-caliber ammunition,the fighting part of a certain type large diameter pressure charging finite element simulation and experiment,according to characteristics of procedure press-load detonator establishment of large-diameter warheads for the step flow chart process,use the finite element simulation of ANSYS examine the charge process of wall of shell and detonating pipe by the force,conduct technology test setting down process parameters,usi... |
| |
| Keywords: | procedure press-load detonator finite element simulation charge |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《兵工自动化》浏览原始摘要信息 |
|
点击此处可从《兵工自动化》下载全文 |
|
