| 一种曲轴用中碳非调质钢的热变形行为 |
| |
| 引用本文： | 王振华,厉勇,曲明贵,任利国,傅万堂.一种曲轴用中碳非调质钢的热变形行为[J].钢铁,2009,44(12). |
| |
| 作者姓名： | 王振华 厉勇 曲明贵 任利国 傅万堂 |
| |
| 作者单位： | 1. 燕山大学亚稳材料制备技术与科学国家重点实验室,河北,秦皇岛,066004
2. 钢铁研究总院结构材料研究所,北京,100081 |
| |
| 摘 要： | 用Gleeble-3500热力模拟试验机对一种中碳曲轴用非调质钢进行1 223~1 473 K和0.2~10 s-1的热压缩变形,获得了其流变曲线,并给出了试验用钢的热变形方程式、动态组织状态图、动态再结晶晶粒尺寸与Z参数之间以及动态再结晶分数与应变量之间的定量关系式。结果表明,试验用钢的流变应力和峰值应变均随变形温度的降低和应变速率的提高而增大,动态再结晶晶粒平均尺寸随着变形Z参数的增大而减小,Z参数越大,发生动态再结晶和完全动态再结晶所需的应变也越大。
|
| 关 键 词： | 中碳非调质钢 热变形 动态再结晶 显微组织 曲轴 |
Study on Hot Deformation Behavior of Medium-Carbon Non-quenched and Tempered Steel for Crankshafts |
| |
| WANG Zhen-hua,LI Yong,QU Ming-gui,REN Li-guo,FU Wan-tang.Study on Hot Deformation Behavior of Medium-Carbon Non-quenched and Tempered Steel for Crankshafts[J].Iron & Steel,2009,44(12). |
| |
| Authors: | WANG Zhen-hua LI Yong QU Ming-gui REN Li-guo FU Wan-tang |
| |
| Affiliation: | WANG Zhen-hua1,LI Yong2,QU Ming-gui1,REN Li-guo1,FU Wan-tang1(1.State Key Laboratory of Metastable Materials Science and Technology,Yanshan University,Qinhuangdao 066004,Hebei,China,2.Institute for Structural Materials,Central Iron and Steel Research Institute,Beijing 100081,China) |
| |
| Abstract: | Hot-compression test of a medium-carbon non-quenched and tempered steel for crankshafts were conducted on a Gleeble-3500 thermal-mechanical simulator.Combining the flow stress with microstructure observation,the hot deformation equation,dynamic microstructure diagram,the quantitative relationship between dynamic recrystallization(DRX) grain size and Z value as well as the relationship between DRX fraction and strain were obtained.The results show that the flow stress and the peak strain increase with the dr... |
| |
| Keywords: | medium-carbon non-quenched and tempered steel hot deformation dynamic recrystallization microstructure crankshaft |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
