| 齿轮压力角对润滑油膜厚度的影响 |
| |
| 引用本文： | 黄靖龙,缪协兴,罗善明,陈立峰.齿轮压力角对润滑油膜厚度的影响[J].润滑与密封,2006(5):25-26. |
| |
| 作者姓名： | 黄靖龙 缪协兴 罗善明 陈立峰 |
| |
| 作者单位： | 1. 中国矿业大学,江苏徐州,221008
2. 湖南科技大学,湖南湘潭,411201 |
| |
| 基金项目： | 中国科学院资助项目;湖南省教育厅青年基金 |
| |
| 摘 要： | 运用弹流润滑理论,分析了轮齿压力角对润滑油膜厚度的影响。结果表明,轮齿压力角的增大,节点最小油膜厚度、接触区内的平均油膜厚度和中心油膜厚度显著增大,对改善齿面润滑极为有利,为非标准重载齿轮的设计提供了理论依据。
|
| 关 键 词： | 齿轮 压力角 承载能力 弹流润滑 |
| 文章编号： | 0254-0150(2006)5-025-2 |
| 收稿时间： | 2005-10-21 |
| 修稿时间： | 2005年10月21 |
Influence of Gear Pressure Angle on Lubricate Oil Film Thickness |
| |
| Huang Jinglong,Miao Xiexing,Luo Shanming,Chen Lifeng.Influence of Gear Pressure Angle on Lubricate Oil Film Thickness[J].Lubrication Engineering,2006(5):25-26. |
| |
| Authors: | Huang Jinglong Miao Xiexing Luo Shanming Chen Lifeng |
| |
| Affiliation: | 1. The China University of Mining, Xuzhou Jiangsu 221008, China ;2. The Hunan University of Science, Xiangtan Hunan 411201, China |
| |
| Abstract: | The influence of gear pressure angle on lubrication oil film thickness was studied by the theory of elasto-hydrodynamic lubrication(EHL).The research finds that the minimum oil film thickness and average oil film thickness of the contact area and center oil film thickness are obviously augmented with the augment of gear pressure angle,it is favorable for improving the involutes profile tooth lubricate.The obtained conclusion is useful to the design of the nonstandard heavy-load gear transmission. |
| |
| Keywords: | gear pressure angle carrying capacity elasto-hydrodynamic lubrication |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
