| Abstract: | Because of its high strength‐to‐weight ratio, corrosion resistance, and low cost, Sheet Molding Compound (SMC) production offers great potential for growth in the automotive and trucking industry. Much attention is now being given to improving the economy of SMC compression molding by reducing the cycle time required to produce acceptable parts in steady production. One of the fastest‐growing applications of Sheet Molding Compound (SMC) compression molding panels is the manufacture of truck body panels. Owing to their large size, the molding forces developed are substantial and have a major influence in the molding cycle. The relevant process models for SMC flow are reviewed and a procedure is developed that can be used to obtain the closing force and calculate the needed material parameters. Experiments were done using commercially made SMC to verify the validity of this model and the compression force was predicted and compared to experimental values for commercially made automotive hoods. |
