| 基于RS274的电火花线切割加工数控系统解释器的设计与实现 |
| |
| 引用本文： | 陈成细,奚学程,徐辉,顾琳,刘华珍.基于RS274的电火花线切割加工数控系统解释器的设计与实现[J].电加工与模具,2011(2):8-11,53. |
| |
| 作者姓名： | 陈成细 奚学程 徐辉 顾琳 刘华珍 |
| |
| 作者单位： | 上海交通大学机械与动力工程学院机械系统与振动国家重点实验室; |
| |
| 基金项目： | 国家863高技术研究发展计划资助项目(2009AA044202); 国家科技重大专项资助项目(2009ZX04003-011) |
| |
| 摘 要： | 针对电火花线切割加工(WEDM)开放式数控系统对解释器的要求,采用了以RS274解释器为基础,结合WEDM的工艺及运动特点,设计并实现支持WEDM加工C代码指令,双平面运动G代码指令及其他辅助加工M代码指令的解释器.最后给出了运行实例,验证了该方法的可行性与正确性.
|
| 关 键 词： | RS274解释器 电火花线切割加工 数控系统 |
Development of NC Code Interpreter for WEDM based on RS274 |
| |
| Chen Chengxi,Xi Xuecheng,Xu Hui,Gu Lin,Liu Huazhen.Development of NC Code Interpreter for WEDM based on RS274[J].Electromachining & Mould,2011(2):8-11,53. |
| |
| Authors: | Chen Chengxi Xi Xuecheng Xu Hui Gu Lin Liu Huazhen |
| |
| Affiliation: | Chen Chengxi,Xi Xuecheng,Xu Hui,Gu Lin,Liu Huazhen(Shanghai Jiao Tong University,Shanghai 200240,China) |
| |
| Abstract: | A new interpreter was developed for wire-EDM CNC base on an open source interpreter known as RS274.RS274 was used in traditional open-architecture CNC system,which was not compatible with wire-EDM CNC systems.Based on wireEDM characteristics,especially the characteristics of process and motion,the implemented interpreter can interpret NC codes such as C-codes for process control parameters and G-codes for servo motion.Besides the straight traverse motion of the Z-axis,for skewcurve machining,the servo motio... |
| |
| Keywords: | RS274 WEDM computer numerical control system |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
