| 反应挤出聚酰胺6／蒙脱土纳米复合材料的双螺杆螺杆元件组合设计 |
| |
| 引用本文： | 赵明,潘湘庆,王依民.反应挤出聚酰胺6／蒙脱土纳米复合材料的双螺杆螺杆元件组合设计[J].中国塑料,2004,18(6):97-100. |
| |
| 作者姓名： | 赵明 潘湘庆 王依民 |
| |
| 作者单位： | 东华大学材料学院 上海200051
(赵明，潘湘庆)，东华大学材料学院 上海200051(王依民) |
| |
| 摘 要： | 研究了已内酰胺单体通过反应型双螺杆反应挤出的方法合成聚酰胺6／蒙脱土纳米复合材料。讨论了反应挤出双螺杆螺杆元件组合设计，螺杆组合与停留时间的关系，以及挤出段螺槽充满程度与排气、冒料的关系。
|
| 关 键 词： | 聚酰胺6 双螺杆 纳米复合材料 |
Design of Assembled Screw Elements of Polyamide 6/Montmorillonite Nanocomposites by Reactive Twin Screw Extruder |
| |
| ZHAO Ming,PAN Xiang-qing,WANG Yi-min.Design of Assembled Screw Elements of Polyamide 6/Montmorillonite Nanocomposites by Reactive Twin Screw Extruder[J].China Plastics,2004,18(6):97-100. |
| |
| Authors: | ZHAO Ming PAN Xiang-qing WANG Yi-min |
| |
| Abstract: | A method of preparation of nylon6/montmorillonite(MMT) nanocomposites directly from caprolactam through reactive twin screw extrusion.Assembled screw elements of reactive twin screw extruder was designed.The effects of different screw configuration on the experimental results were compared.The relation between the screw form and the residence time were discussed. |
| |
| Keywords: | polyamide 6 twin screw nanocomposite |
| 本文献已被 CNKI 维普 等数据库收录！ |
