首页 | 本学科首页   官方微博 | 高级检索  
     

超细硬质合金生产过程中的质量控制
引用本文:汪中玮,张卫兵,周华堂.超细硬质合金生产过程中的质量控制[J].粉末冶金技术,2007,25(4):284-288.
作者姓名:汪中玮  张卫兵  周华堂
作者单位:株洲硬质合金集团有限公司,湖南株洲,412000
摘    要:综述了超细硬质合金在生产过程中的质量控制,着重分析了中低钴(质量分数《8%)超细硬质合金在生产过程中容易出现的微孔隙、聚晶、钴池、晶粒长大和夹粗等缺陷及其可能产生的原因.大量超细硬质合金工业化生产实践表明:选用粒度分布均匀、杂质含量低的超细粉末原料,并配以相应的湿磨、压制和烧结工艺以及对生产各环节精确、量化控制和管理等是生产优质、高性能超细硬质合金的关键因素.

关 键 词:超细硬质合金  质量  缺陷
收稿时间:2006-09-08
修稿时间:2006-09-08

Quality controll of the superfine cemented carbide in production run
Wang Zhongwei,Zhang Weibing,Zhou Huatang.Quality controll of the superfine cemented carbide in production run[J].Powder Metallurgy Technology,2007,25(4):284-288.
Authors:Wang Zhongwei  Zhang Weibing  Zhou Huatang
Abstract:Quality controll of the low cobalt content(cobalt content less than 8wt%) superfine cemented carbide in production,defects such as micro-bore,aggregation,cobalt lake,grain growth,or intermingled coarse grain,etc,and their possible causation are summarized.Mass praduction of superfine cemented carbide shows that choosing uniform and low impurity superfine raw material powder,milling pressing,and sintering process,and precision controll in production run,are the key factors for producing high quality and superfine cemented carbide.
Keywords:superfine cemented carbide  quality  defect
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号