| 铸铁CrMo表面激光熔覆Ni基高温合金粉末的磨损特性 |
| |
| 引用本文： | 张云凤,闫玉涛,孙志礼. 铸铁CrMo表面激光熔覆Ni基高温合金粉末的磨损特性[J]. 润滑与密封, 2007, 32(7): 108-110,117 |
| |
| 作者姓名： | 张云凤 闫玉涛 孙志礼 |
| |
| 作者单位： | 东北大学机械工程与自动化学院,辽宁沈阳,110001;沈阳建筑大学交通与机械工程学院,辽宁沈阳,110168;东北大学机械工程与自动化学院,辽宁沈阳,110001 |
| |
| 摘 要： | 采用激光熔覆技术在铸铁CrMo表面制备了Ni基高温合金熔覆层,采用SEM和晶相仪分析了激光熔覆层的晶相组织。采用回归正交试验方法,研究了基体和熔覆层在不同载荷和速度下的磨损特性。结果表明,熔覆层与基体形成良好的冶金结合,熔覆层组织致密,主要由树枝晶和共晶构成,熔覆层和基体材料的磨损机制为磨粒磨损;铸铁CrMo表面激光熔覆Ni基高温合金粉末可以提高表面的耐磨性能。
|
| 关 键 词： | 激光熔覆层 Ni基高温合金 磨损 |
| 文章编号： | 0254-0150（2007）7-108-3 |
| 修稿时间： | 2007-03-02 |
Wear Characteristics of Ni-base Super-alloy onto CrMo Cast Iron by Laser Cladding |
| |
| Zhang Yunfeng,Yan Yutao,Sun Zhili. Wear Characteristics of Ni-base Super-alloy onto CrMo Cast Iron by Laser Cladding[J]. Lubrication Engineering, 2007, 32(7): 108-110,117 |
| |
| Authors: | Zhang Yunfeng Yan Yutao Sun Zhili |
| |
| Affiliation: | 1. College of Mechanical Engineering and Automation, Northeast University, Shenyang Liaoning 110001, China; 2. Tragic and Mechanical Engineering School , Shenyang Jianzhu University, Shenyang Liaoning 110168, China |
| |
| Abstract: | Metallurgical binding and compact alloy layers were prepared by laser cladding technology with Ni-base super-alloy powders on CrMo cast iron. The microstructure of the laser cladding was analyzed using SEM and EPMA. The wear test of alloy layers were carried out under conditions of different vilocity and loads. The microhardness of the laser cladding layer and the substrate was measured. The study result shows that the wear mechanism of the alloy layer is abrasive wear,and the wear performance increases greatly than that of CrMo cast iron. |
| |
| Keywords: | laser cladding layers Ni-base high super-alloy wear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
