首页 | 本学科首页   官方微博 | 高级检索  
     

分形技术在气固流化床起始流化状态研究中的应用
引用本文:吴贤国,黄志尧,王保良,李海青.分形技术在气固流化床起始流化状态研究中的应用[J].浙江大学学报(自然科学版 ),2001,35(3):289-292.
作者姓名:吴贤国  黄志尧  王保良  李海青
作者单位:吴贤国(浙江大学 控制系国家重点实验室,浙江 杭州 310027)       黄志尧(浙江大学 控制系国家重点实验室,浙江 杭州 310027)       王保良(浙江大学 控制系国家重点实验室,浙江 杭州 310027)       李海青(浙江大学 控制系国家重点实验室,浙江 杭州 310027)
基金项目:国家自然科学基金(青年基金)资助项目(29706008)。
摘    要:基于分形技术研究了气固流化床从固定床向流态化床转变过程中压力波动信号的有关特性.目的在于寻求判断这种转变的方法.在将分数布朗运动(fBM)作为压力波动信号数学模型的基础上,采用R/S分析法从信号的时间序列中提取出Hurst指数,并观察它在不同表观气速下的变化.实验结果表明,信号的Hurst指数在起始流化速度附近有一个强劲的峰值,运用Hurst指数可进行起始流化速度的估计.

关 键 词:气固流化床  压力波动  分形  起始流化速度
文章编号:1008-973X(2001)03-0289-04
修稿时间:1999年12月5日

Application of fractal technology for the study of initialized fluidized state of gas-solid fluidized bed
WU Xian\|guo,HUANG Zhi\|yao,WANG Bao\|liang,LI Hai\|qing \,.Application of fractal technology for the study of initialized fluidized state of gas-solid fluidized bed[J].Journal of Zhejiang University(Engineering Science),2001,35(3):289-292.
Authors:WU Xian\|guo  HUANG Zhi\|yao  WANG Bao\|liang  LI Hai\|qing \  
Abstract:Based on fractal technology, transformation from fixed bed to fluidized bed of gas\|solid fluidized bed was studied, with the purpose of searching judgement way of the transformation. Modeling pressure fluctuation signal as the fractal Brownion Motion(fBM), Hurst exponent was calculated from time\|series with R/S analysis method and observed the change of Hurst exponent at different superficial gas velocity. The experimental results indicated that Hurst exponent was a driving peak\|value near by the minimum fluidization velocity. Thus, Hurst exponent was promising to the estimation of the minimum fluidization velocity of gas\|solid fluidized bed.
Keywords:gas\|solid fluidized bed  pressure fluctuation  fractal  minimum fluidization velocity
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号