| 基于ProCAST的壳座压铸数值模拟及工艺优化 |
| |
| 引用本文： | 王成玥,胡清和,陈峰.基于ProCAST的壳座压铸数值模拟及工艺优化[J].特种铸造及有色合金,2019(2):143-146. |
| |
| 作者姓名： | 王成玥 胡清和 陈峰 |
| |
| 作者单位： | 沈阳理工大学艺术设计学院;沈阳理工大学汽车与交通学院 |
| |
| 摘 要： | 根据壳座压铸件的结构特点,设计出壳座压铸模具和压铸工艺,用ProCAST软件对壳座压铸充型凝固过程进行数值模拟。模拟优化出合理的压铸工艺参数:浇注温度为590℃,压射速度为3.4m/s,模具预热温度为165℃。用优化的压铸工艺参数进行压铸生产,得到了合格的壳座压铸件。金相组织观察结果表明壳座质量合格。
|
| 关 键 词： | 壳座 数值模拟 充型凝固 工艺优化 |
Numerical Simulation and Processing Optimization of Die-casting Shell Seat Based on the ProCAST Software |
| |
| Wang Chengyue,Hu Qinghe,Chen Feng.Numerical Simulation and Processing Optimization of Die-casting Shell Seat Based on the ProCAST Software[J].Special Casting & Nonferrous Alloys,2019(2):143-146. |
| |
| Authors: | Wang Chengyue Hu Qinghe Chen Feng |
| |
| Affiliation: | (Institute of Art and Design,Shenyang Ligong University;Institute of Automobile and Transportation,Shenyang Ligong University) |
| |
| Abstract: | According to the structural characteristics of the shell seat,the die casting die and die-casting process were designed.The filling and solidification process of shell seat was simulated by the ProCAST software.The reasonable die-casting parameters were presented as follows:pouring temperature of 590℃,injection velocity of 3.4 m/s,mold preheating temperature of 165℃.The die-casting experiments with optimized die casting parameters were carried out,and qualified shell seat was manufactured sucessfully.The metallographic structure of the shell seat was observed,which verified that the quality was qualified. |
| |
| Keywords: | Shell Seat Numerical Simulation Filling Solidification Processing Optimization |
| 本文献已被 CNKI 维普 等数据库收录！ |
