| 放电等离子烧结热压时间对SiC_f/TC17板材致密化的影响 |
| |
| 引用本文： | 解川,鲁世强,黄浩,王敏涓,李虎,张书铭,黄旭. 放电等离子烧结热压时间对SiC_f/TC17板材致密化的影响[J]. 特种铸造及有色合金, 2019, 0(9): 997-1002 |
| |
| 作者姓名： | 解川 鲁世强 黄浩 王敏涓 李虎 张书铭 黄旭 |
| |
| 作者单位： | 南昌航空大学轻合金加工科学与技术国防重点学科实验室;北京航空材料研究院先进钛合金航空科技重点实验室 |
| |
| 基金项目： | 中国航发创新基金资助项目(ZGHF-ZL-2017-C061) |
| |
| 摘 要： | 采用放电等离子烧结(SPS)对连续SiCf增强TC17复合材料板材预制体进行热压制备,研究了不同热压时间对SiCf/TC17复合材料致密化程度的影响。结果表明,SiCf/TC17复合材料的相对密度随热压时间延长而提高,在50 MPa、900℃下保温15min基本实现了致密化,相对密度达到99.4%。此外,基于对放电等离子烧结参数曲线和具有代表性的微观组织特征的分析,可将SiCf/TC17复合材料板材预制体的致密化过程分为先驱丝表面净化与活化、快速致密化和蠕变致密化3个阶段,并对致密化过程中先驱丝钛合金涂层的塑性变形及致密化机理进行了初步分析。
|
| 关 键 词： | 钛基复合材料 放电等离子烧结 致密化机理 |
Effects of Hot Pressing Time of Spark Plasma Sintering on Densification Rate of SiC_f/TC17 Sheet |
| |
| Xie Chuan,Lu Shiqiang,Huang Hao,Wang Minjuan,Li Hu,Zhang Shuming,Huang Xu. Effects of Hot Pressing Time of Spark Plasma Sintering on Densification Rate of SiC_f/TC17 Sheet[J]. Special Casting & Nonferrous Alloys, 2019, 0(9): 997-1002 |
| |
| Authors: | Xie Chuan Lu Shiqiang Huang Hao Wang Minjuan Li Hu Zhang Shuming Huang Xu |
| |
| Affiliation: | (National Defense Key Discipline Laboratory of Light Alloy Processing Science and Technology,Nanchang Hangkong University;Aviation Key Laboratory of Science and Technology on Advanced Titanium Alloys,Beijing Institute of Aeronautical Materials)) |
| |
| Abstract: | Spark Plasma Sintering(SPS)technology was used to prepare the continuous SiC fiber reinforced TC17 titanium matrix composites(SiCf/TC17)sheet at different hot pressing time.The effects of hot pressing time on the densification rate of SiCf/TC17 were analyzed.The results show that the relative density of SiCf/TC17 is improved with the increase of the hot pressing time,and the densification rate can be basically realized at 900℃and 50 MPa for 15 min,with the relative density of 99.41%.In addition,by combining the SPS parameter curves with representative microstructure characteristics,the densification process of SiCf/TC17 can be divided into three stages:the purification and activation of precursor fiber surface,the rapid densification and the creep densification.On this basis,the deformation and densification mechanism of titanium alloy coating of SiCf/TC17 precursor fibers in SPS process were described. |
| |
| Keywords: | Titanium Matrix Composites Spark Plasma Sintering Densification Mechanism |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
