| 基于ProCAST软件的压铸镁合金脚踏板的数值模拟研究 |
| |
| 引用本文： | 董艺,潘登,杨召岭.基于ProCAST软件的压铸镁合金脚踏板的数值模拟研究[J].特种铸造及有色合金,2019(9):973-976. |
| |
| 作者姓名： | 董艺 潘登 杨召岭 |
| |
| 作者单位： | 华南理工大学广州学院;湖北汽车工业学院;东风(十堰)有色铸件有限公司 |
| |
| 摘 要： | 介绍了数值模拟技术在镁合金脚踏板压铸件成形过程中的应用。首先对压铸件进行工艺分析,确定浇注系统设计方案和压铸工艺参数,然后用Pro/E软件建立铸件三维模型。在此基础上,用ProCAST软件对铸件成形过程进行数值模拟,并结合压铸工艺对流动性、卷气情况和缩孔、缩松倾向进行分析。根据分析结果,优化浇注系统并调整工艺参数,通过试生产验证优化方案的合理性。
|
| 关 键 词： | 镁合金 压铸 PROCAST 数值模拟 脚踏板 |
Numerical Simulation for Die-casting Magnesium Alloy Pedal Based on ProCAST Software |
| |
| Dong Yi,Pan Deng,Yang Zhaoling.Numerical Simulation for Die-casting Magnesium Alloy Pedal Based on ProCAST Software[J].Special Casting & Nonferrous Alloys,2019(9):973-976. |
| |
| Authors: | Dong Yi Pan Deng Yang Zhaoling |
| |
| Affiliation: | (Guangzhou College,South China University of Technology;Hubei University of Automotive Technology;Dongfeng(Shiyan )Nonferrous Casting Co.,Ltd.) |
| |
| Abstract: | The application of numerical simulation technology in the die casting magnesium alloy pedal was introducted.First,the gating system scheme and the technological parameters were determined by analysis,and a numerical model of the pedal was established based on the ProCAST software.Then the numerical simulation of the die casting process was carried out by the ProCAST software.The results were predicted including fluidity,gas hole and shrinkage and so on.Finally,some measures were presented to optimize the gating system and parameters.The results show that the optimized scheme is feasible. |
| |
| Keywords: | Magnesium Alloy Die Casting ProCAST Numerical Simulation Pedal |
| 本文献已被 CNKI 维普 等数据库收录！ |
