首页 | 本学科首页   官方微博 | 高级检索  
     

转炉锰矿直接合金化生产实践
引用本文:王大萍,张波,郝春晖,刘浪,李春晓. 转炉锰矿直接合金化生产实践[J]. 特殊钢, 2019, 40(1): 39-42
作者姓名:王大萍  张波  郝春晖  刘浪  李春晓
作者单位:湖南工业大学冶金与材料工程学院,株洲,412007;
基金项目:国家自然科学资金项目资助(51504090)
摘    要:在100 t顶底复吹转炉上使用锰矿自还原压块进行直接合金化工业试验中,并对冶炼过程中钢水和炉渣进行取样分析。研究表明:在采用锰矿自还原压块进行转炉直接合金化时,金属锰的收得率平均为65.17%,但有较大波动;提高转炉终点[C],减少转炉渣量,降低炉渣氧化性可有效提高金属Mn的收得率;当按15 kg/t配入团块,转炉终点温度平均降低18℃,未对转炉的正常冶炼造成影响。

关 键 词:100t顶底复吹转炉  直接合金化  锰矿压块  自还原  SS400钢  
收稿时间:2018-07-19

Production Practice of Direct Alloying of Manganese ore on Converter
Wang Daping,Zhang Bo,Hao Chunhui,Liu Lang,Li Chunxiao. Production Practice of Direct Alloying of Manganese ore on Converter[J]. Special Steel, 2019, 40(1): 39-42
Authors:Wang Daping  Zhang Bo  Hao Chunhui  Liu Lang  Li Chunxiao
Affiliation:School of Metallurgical and Material Engineering, Hunan University of Technology, Zhuzhon 412007 ;
Abstract:The industrial experiment of direct alloying by manganite self-reducing briquettes was carried out in 100 t top botton combined converter, and the steel and slag were sampled and analyzed during smelting. The results show that the average yield of manganese is 65.17% ,but it fluctuates greatly when the manganite ore self-reducing briquettes was added in the converter. Improving the end point of [C] , reducing the amount of slag and reducing the oxidation of slag can effectively improve the yield of manganese. When the adding amount of the briquettes was 15 kg/t, the average temperature drop 18 ℃. ,and that will not affect the normal smelting of the converter.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《特殊钢》浏览原始摘要信息
点击此处可从《特殊钢》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号