| 整体叶轮的逆向数据采集和模型重建 |
| |
| 引用本文： | 白瑀,张浩,黄亮,蒋葳. 整体叶轮的逆向数据采集和模型重建[J]. 特种铸造及有色合金, 2019, 0(3): 293-297 |
| |
| 作者姓名： | 白瑀 张浩 黄亮 蒋葳 |
| |
| 作者单位： | 西安工业大学机电工程学院 |
| |
| 基金项目： | 国家自然科学基金资助项目(51705392) |
| |
| 摘 要： | 研究利用逆向工程技术来实现某整体式叶轮模型的重建。通过XTOM教育型面扫描系统对整体式叶轮模型点云数据进行采集,并基于Imageware数据处理软件对叶轮点云数据进行处理,结合旋转法和截面放样法对轮毂和叶片曲面进行创建,在误差控制条件下最终实现叶轮模型精确重建。
|
| 关 键 词： | 整体式叶轮 逆向数据 模型重构 |
Reverse Data Acquisition and Model Reconstruction of Integral Impeller |
| |
| Bai Yu,Zhang Hao,Huang Liang,Jiang Wei. Reverse Data Acquisition and Model Reconstruction of Integral Impeller[J]. Special Casting & Nonferrous Alloys, 2019, 0(3): 293-297 |
| |
| Authors: | Bai Yu Zhang Hao Huang Liang Jiang Wei |
| |
| Affiliation: | (Mechanical and Electrical Engineering Institute,Xian Technological University) |
| |
| Abstract: | Reverse engineering technology was used to reconstruct an integral impeller model.In particular,the point cloud data of the integral impeller model was collected through the XTOM educational surface scanning system,and the point cloud data of the impeller model was processed based on Imageware data processing software.The wheel hub and blade surface were created by combining the rotation method with the section lofting method,and the accurate reconstruction of the impeller model was finally realized under the condition of error control. |
| |
| Keywords: | Integral Impeller Reverse Data Model Reconstruction |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
