| 主从式快速原型系统的开发 |
| |
| 引用本文： | 刘亚东,李从心,郭新贵,汪德才. 主从式快速原型系统的开发[J]. 制造技术与机床, 2003, 0(5): 34-36 |
| |
| 作者姓名： | 刘亚东 李从心 郭新贵 汪德才 |
| |
| 作者单位： | 上海交通大学国家模具CAD工程研究中心 |
| |
| 摘 要： | 在应用LOM技术的快速原型(RP)系统中，运动控制卡广泛用于轮廓控制，驱动刀具(激光)实现工件轮廓的切割。在分析RP系统控制需求的基础上设计并实现了由两台PC机组成的主从式系统，克服了原系统中存在的问题，提高了轮廓加工的速度和精度。该系统在新加坡Kinergy公司的ZIP-PYI型RP机上改装成功，实际控制效果良好。
|
| 关 键 词： | 主从式快速原型系统 LOM 离线插补 轮廓控制 开发 |
| 修稿时间： | 2002-01-07 |
Development of Master-Slave RP System |
| |
| LIU Yadong,et al.. Development of Master-Slave RP System[J]. Manufacturing Technology & Machine Tool, 2003, 0(5): 34-36 |
| |
| Authors: | LIU Yadong et al. |
| |
| Affiliation: | Shanghai Jiaotong University |
| |
| Abstract: | In rapid prototyping (RP) system using LOM technology, the motion_controlling card is widely used in contour control, driving tool (laser) for cutting workpiece contour. Based on analysis on the control requirement of RP system, the text analyzes and realizes a master_slave system consisting of two PCs, which overcomes the problems in previous system, increases the speed and accuracy for contour machining. The system has been successfully used in ZIPPYI RP unit of Singapore Kinergy Co., and it has got a good practical effect. |
| |
| Keywords: | Rapid Prototyping LOM Off_line Interpolation Contour Control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
