| Abstract: | A new emulsion polymerization process, in which water acted as the dispersed phase and a mixture of methyl methacrylate (MMA) and cyclohexane acted as the continuous phase, was applied to the preparation of a poly(methyl methacrylate) (PMMA) resin. The primary (latex) particles were formed in the early stage of polymerization and coagulated as the polymerization conversion increased. Scanning electron micrographs showed that the final PMMA particles were porous and composed of loosely aggregated primary particles. The porosity characterized by cold di(2‐ethylhexyl) phthalate absorption increased as the water/oil and cyclohexane/MMA mass ratios increased. The PMMA primary particles were smaller than the primary particles in the PMMA resin prepared by suspension polymerization in the presence of cyclohexane. Because of the phase composition of the reaction system, the solubility of PMMA in a mixture of cyclohexane and MMA, and the particle morphology of PMMA, a particle formation mechanism, including the formation, growth, and coagulation of primary particles in dispersed water droplets, was proposed. The primary particles formed mainly through a homogeneous nucleation mechanism and increased in size as MMA diffused from the oil phase to the water phase to the primary particles. The coagulation of the primary particles occurred because of the lower colloidal stability and the space limitations of the primary particles. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1905–1911, 2004 |
