Metallocene‐based functionalized polyolefins as compatibilizers in polyolefin nanocomposites |
| |
Authors: | Kshama Motha Ulla Hippi Kimmo Hakala Maija Peltonen Vuokko Ojanper Barbro Lfgren Jukka Seppl |
| |
Affiliation: | Kshama Motha,Ulla Hippi,Kimmo Hakala,Maija Peltonen,Vuokko Ojanperä,Barbro Löfgren,Jukka Seppälä |
| |
Abstract: | This article reports a study of some functionalized polyolefins evaluated as compatibilizers in polyethylene nanocomposites. The functionalized polymers were prepared by direct metallocene‐mediated copolymerizations of ethylene and a functional comonomer. The prepared nanocomposites were evaluated for mechanical and barrier property enhancement. A good combination of mechanical and barrier properties was obtained with the metallocene‐based functionalized polyethylene. The toughness–stiffness balance was better than or comparable to that achieved with conventional functionalized polymers such as maleic anhydride grafted polyethylene. The results also indicated that these metallocene‐based functionalized polyolefins, when used as compatibilizers, could have relatively higher molar masses and lower functionality than those of conventional post‐reactor‐modified compatibilizers, and so the drawbacks associated with the latter could be avoided. Their inherent properties could also further improve the final nanocomposite properties. This was attributed to the more homogeneous nature of metallocene‐catalyzed polymers in comparison with post‐reactor‐modified products. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1094–1100, 2004 |
| |
Keywords: | compatibilization functionalization of polymers organoclay nanocomposites polyolefins |
|
|