首页 | 本学科首页   官方微博 | 高级检索  
     

疲劳裂纹在Cr25—Ni13/13CrMo44异种钢焊接接头中的扩展行为
引用本文:王智慧,叶赐麒,马龙.疲劳裂纹在Cr25—Ni13/13CrMo44异种钢焊接接头中的扩展行为[J].北京工业大学学报,1990(4).
作者姓名:王智慧  叶赐麒  马龙
作者单位:金属材料科学与工程学系 (王智慧,叶赐麒),燕山机械厂(马龙)
摘    要:采用三点弯曲试样研究了疲劳裂纹在奥氏体/铁素体异种钢焊接接头中的扩展行为与显微组织的关系。测得了疲劳裂纹在Cr25Ni13/13CrMo44异种钢焊接接头中的扩展速率da/dN,并且讨论了疲劳裂纹扩展与显微组织之间的关系。分析实验结果认为,在奥氏体/铁素体异种钢焊接接头中,疲劳裂纹的扩展路径主要受组织韧性的控制。

关 键 词:疲劳裂纹  异种铜焊接接头

The Behaviour of the Fatigue Grack Propagation in Cr25-Nil3/13CrMo44 Dissimilar Metal Joints
Wang Zhihui Ye Ciqi.The Behaviour of the Fatigue Grack Propagation in Cr25-Nil3/13CrMo44 Dissimilar Metal Joints[J].Journal of Beijing Polytechnic University,1990(4).
Authors:Wang Zhihui Ye Ciqi
Affiliation:Wang Zhihui Ye Ciqi(Department of Metallic Materials Science and Engineering)Ma Long(Yanshan Machinery Works)
Abstract:The relationship between the behaviour of the fatigue crack propagation and the microstructure in the austenitic-ferritic dissimilar metal joints has been studied based on the three-point bend specimens, and the data of crack propagation velocity da/dM have been obtained. The results show that the martensite layer has the effect of resistance to the fatigue crack propagation in the Cr25-Ni 13/13CrMo44 dissimilar metal joints. The path that the fatigue cracks propagates is in the overheated zone in HAZ, which is weak in toughness. The crack propagation is mainly controlled by the toughness of the microstructures.
Keywords:fatigue crack  dissimilar metal joint  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号