低屈服点钢扣板连接的试验研究

同心支撑框架被广泛用于钢结构房屋的抗震设计中。在地震激励下,同心支撑框架的支撑会承受循环拉压荷载。由于支撑的屈曲,其抗压强度通常低于抗拉强度,这可能会降低支撑框架的抗震性能。该文对采用弱扣板强支撑的设计理念进行了验证。扣板选用低屈服点钢(LYP),从而使设计的扣板在支撑屈曲前发生屈服。低屈服点钢的屈服强度很低,但其延性很好。通过一系列试验验证循环荷载作用下低屈服点钢扣板的性能。研究发现,在低屈服点钢扣板上增加槽型约束(STR)可以大大提高其抗震性能。在拉压荷载作用下,有槽型约束的低屈服点钢扣板可以提供类似大小的强度。扣板的耗能能力同样得到提高。基于此研究成果,给出低屈服点钢扣板的一些设计建议。

Experimental Study of Low Yield Point Steel Gusset Plate Connections

Concentrically braced frames have been used widely in the seismic-resistant design of steel building structures. During earthquake excitation, the braces of the concentrically braced frame are subjected to recursive tensile and compressive forces. The compressive strength of the brace is usually less than its tensile strength because of the buckling of the brace, and this may degenerate the seismic resistance capacity of the braced frame. In this reported research, an alternative design concept that adopts the weak gusset plate-strong brace is examined. The gusset plate is designed to yield prior to the buckling of the brace. Low yield point (LYP) steel is selected for the gusset plate. The LYP steel possesses low yield strength and high elongation capacity. A series of experimental studies was carried out to examine the LYP steel gusset plates under cyclic loads. It is found that adding slot-type restrainers (STR) to the LYP steel gusset plate greatly enhances the seismic resistance of the gusset plate. The proposed LYP steel gusset plate with an STR is able to provide similar strengths under tensile and compressive loads. The energy dissipation capacity of the gusset plate is also increased substantially. Based on this study, suggestions are made for the design of LYP gusset plates.