Effect of impinging ion energy on the substrates during deposition of SiOx films by radiofrequency plasma enhanced chemical vapor deposition process

Radiofrequency (13.56 MHz) plasma enhanced chemical vapor deposition process is used for deposition of SiO_x films on bell metal substrates using Ar/hexamethyldisiloxane/O₂ glow discharge. The DC self-bias voltage developed on the substrates is observed to be varied from − 35 V to − 115 V depending on the RF power applied to the plasma. Plasma potential measurements during film deposition process are carried out by self-compensated emissive probe. The deposited films are characterized by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), nanoindentation, nano-scratch test and thermogravimetric analysis. The characterization results show strong dependency of the SiO_x films properties on the energy of the ions impinging on the substrates during deposition. Analysis of Raman spectra indicates an increase in vitreous silica content and reduction in defective Si-O-Si chemical structure in the deposited SiO_x films with increasing ion energy impinging on the substrates. The increase in inorganic (Si and O) content in the SiO_x films is further confirmed from XPS analysis. The growth of SiO_x films with more inorganic content and defect free chemical structure apparently contribute to the increase in their hardness and scratch resistance behavior. The films show higher thermal stability as the energy of the ions arriving at substrates increases with DC self-bias voltage. The possibility of using SiO_x films for surface protection of bell metal is also explored.