| 不锈钢(0Cr18Ni11Ti)切削力和切削温度的有限元分析 |
| |
| 引用本文： | 韦伟,任家隆. 不锈钢(0Cr18Ni11Ti)切削力和切削温度的有限元分析[J]. 工具技术, 2009, 43(2): 67-70 |
| |
| 作者姓名： | 韦伟 任家隆 |
| |
| 作者单位： | 江苏科技大学;江苏科技大学 |
| |
| 摘 要： | 基于Deform-2D有限元分析软件，建立了热力耦合、平面应变模型和正交试验表，模拟了不锈钢（0Cr18Ni11Ti）的车削加工过程，分析了刀具几何参数、切削参数以及换热系数对工件切削力和切削温度的影响，为提高不锈钢的加工表面质量提供了有价值的参考数据，并为下一步的切削参数优化奠定了基础。
|
| 关 键 词： | 切削力 切削温度 有限元分析 不锈钢 |
Finite Element Analysis of Cutting Force and Cutting Temperature for Stainless Steel |
| |
| Wei Wei,Ren Jialong. Finite Element Analysis of Cutting Force and Cutting Temperature for Stainless Steel[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2009, 43(2): 67-70 |
| |
| Authors: | Wei Wei Ren Jialong |
| |
| Affiliation: | Postgraduate;School of Mechanical and Power Engineering;Jiangsu University of Science and Technology;Zhenjiang City;Jiangsu Province;China;212003 |
| |
| Abstract: | Based on the FEM analysis software Dform-2D,the coupled thermo-mechanical and plane-strain models and orthogonal test sheet were established to simulate the process of turning stainless steel(0Cr18Ni11Ti).The influences of cutter geometry parameters,cutting parameters and the heat exchange coefficient on cutting force and cutting temperature were analyzed.This research provides valuable references to improve machined surface quality of stainless steel,and sets a basis for the optimization of cutting paramet... |
| |
| Keywords: | cutting force cutting temperature finite element analysis stainless steel |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
