首页 | 本学科首页   官方微博 | 高级检索  
     

磨浮工艺流程的改进与指标提高
引用本文:刘恒柏,张中华,胡中柱,李名水,易智. 磨浮工艺流程的改进与指标提高[J]. 黄金科学技术, 2005, 0(Z1)
作者姓名:刘恒柏  张中华  胡中柱  李名水  易智
作者单位:湖北三鑫金铜股份有限公司,湖北三鑫金铜股份有限公司,湖北三鑫金铜股份有限公司,湖北三鑫金铜股份有限公司,湖北三鑫金铜股份有限公司 湖北大冶市,435100,湖北大冶市,435100,湖北大冶市,435100,湖北大冶市,435100,湖北大冶市,435100
摘    要:通过流程考察和分析,将原磨矿工艺增加一段闭路磨矿流程改为一段磨矿、分级机溢流进入旋流器分级再磨流程;浮选流程由原来的混选部分一粗一扫一精改为两粗,其中一粗直接产出混合精矿,三扫,一精,使金回收率提高 4%,铜回收率提高 3%,效益十分可观。

关 键 词:浮选  磨矿  检查分级  流程改进  指标提高

Rubs Floats The Technical Process The Improvement and the Target Enhances
LIU Hengbai,ZHANG ZhongHua,HU Zhongzhu,LI Mingshui,YI Zi. Rubs Floats The Technical Process The Improvement and the Target Enhances[J]. Gold Science and Technololgy, 2005, 0(Z1)
Authors:LIU Hengbai  ZHANG ZhongHua  HU Zhongzhu  LI Mingshui  YI Zi
Abstract:Through the flow inspection and the analysis, increases the original rubbing craft a section of closed circuit grindings flow to change section of rubbings, the sorting machineoverflow enters the cyclone graduation rubbing once flow; The flotation flow by original mixes partially elects one thick one sweep one fine changes two thick, one rough and straightforward meets delivers the mix ore concentrate, three sweeps, an essence, makes the golden returns-ratio to enhance 4%, the copper returns-ratio enhances 3%, the benefit is extremely considerable.
Keywords:Flotation process  Rubbing  Inspection graduation  Flow improvement  Target enhancement  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号