| Zero-Max型无级变速器连杆机构的误差分析 |
| |
| 引用本文： | 徐俊,胡丽萍,孙维光,樊智敏. Zero-Max型无级变速器连杆机构的误差分析[J]. 青岛科技大学学报(自然科学版), 2007, 28(3): 231-233 |
| |
| 作者姓名： | 徐俊 胡丽萍 孙维光 樊智敏 |
| |
| 作者单位： | 青岛科技大学机电工程学院,山东青岛266061 |
| |
| 摘 要： | 通过分析Zero-Max型无级变速器连杆机构误差的影响因素,得出输出角误差是各原始误差的线性组合。根据机构运动学理论,对连杆机构传动误差进行分析,把可调六杆机构拆成2个串连的四杆机构,建立了Zero-Max型无级变速器连杆机构的输出角误差方程。
|
| 关 键 词： | Zero-Max型无级变速器 连杆机构 误差分析 |
| 文章编号： | 1672-6987（2007）03-0231-03 |
| 收稿时间： | 2006-09-21 |
| 修稿时间： | 2006-09-21 |
Error Analysis of Linkage Mechanism of Zero-Max Type CVT |
| |
| XU Jun,HU Li-ping,SUN Wei-guang,FAN Zhi-min. Error Analysis of Linkage Mechanism of Zero-Max Type CVT[J]. Journal of Qingdao University of Science and Technology:Natutral Science Edition, 2007, 28(3): 231-233 |
| |
| Authors: | XU Jun HU Li-ping SUN Wei-guang FAN Zhi-min |
| |
| Affiliation: | College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, China |
| |
| Abstract: | The conclusion that the error of output angle is the linearity combination of original errors is obtained by analyzing the error influence factors of linkage mechanism of Zero-max type CVT. According to the mechanism kinematics theory, the error formula of output angle of the linkage mechanism of Zero-max type CTV is educed by analyzing the transmission error of linkage and dividing the adjustable six-bar linkage into two four-bar linkage in series. |
| |
| Keywords: | Zero-Max type CVT linkage mechanism error analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
