Ni-Co-P/SiC镀层和SiC表面金属化

在镀液中加入表面活性剂，实现SiC表面金属化，再运用化学复合镀方法制备Ni-Co-P/SiC复合镀层。用扫描电镜等观察了复合镀层的组织及形貌，并测量了镀层的成分，通过对镀层硬度、耐磨性，孔隙率和耐蚀性的分析，结果表明，在镀层中加入表面活性剂和实现SiC表面金属化，提高了镀层硬度，耐磨性，降低了镀层孔隙率，改善了镀层在不同腐蚀介质下的耐蚀性。

EFFECT OF SURFACE ACTIVATOR AND SiC SURFACE METALIZATION ON THE ELECTROLESS COMPOSITE PLATING OF Ni-Co-P/SiC

Surface activator was added to the electroless solution and SiC surface metalization was realized. Ni-Co-P/SiC composite coating was obtained by the method of electroless composite deposition. The morphology was observed and the composition of coating was analysed with JSM-35CF SEM and so on. The analysis results of micro-hardness, wear resistance, porosity and corrosion resistance show that adding surface activator and SiC surface metalization increase the micro-hardness and wear resistance of composite coating, decrease the coating porosity and improve the corrosion resistance in different corrosion media.