| 冷轧板夹杂类表面缺陷研究的进展 |
| |
| 引用本文： | 彭其春,田俊,张学辉,彭胜堂,郑万.冷轧板夹杂类表面缺陷研究的进展[J].炼钢,2009,25(1). |
| |
| 作者姓名： | 彭其春 田俊 张学辉 彭胜堂 郑万 |
| |
| 作者单位： | 1. 武汉科技大学,钢铁冶金及资源利用省部共建教育重点实验室,湖北,武汉,430081
2. 武汉钢铁(集团)公司,湖北,武汉,430080 |
| |
| 摘 要： | 随着家电、汽车工业的发展,对冷轧板质量要求越来越高.冷轧板夹杂类表面缺陷是冷轧板常见缺陷之一,严重影响冷轧板的外观及其使用性能.探讨了线状缺陷、孔洞、疤/坑3类常见夹杂类表面缺陷的特点、形成原因和控制措施.
|
| 关 键 词： | 冷轧板 夹杂 线状缺陷 孔洞 疤/坑 |
Progress of research on inclusion induced surface defect of cold rolled sheet |
| |
| PENG Qi-chun,TIAN Jun,ZHANG Xue-hui,PENG Sheng-tang,ZHENG Wan.Progress of research on inclusion induced surface defect of cold rolled sheet[J].Steelmaking,2009,25(1). |
| |
| Authors: | PENG Qi-chun TIAN Jun ZHANG Xue-hui PENG Sheng-tang ZHENG Wan |
| |
| Affiliation: | 1.Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministryof Education;Wuhan University of Science and Technology;Wuhan 430081;China;2.Wuhan Iron & Steel Corp;Wuhan 430080;China |
| |
| Abstract: | The demand for quality of the cold rolled plates is more and more stringent with development of electrical appliances and automobile industry.The surface defect caused by inclusion is one of the most common defects of cold rolled sheet,which seriously affects the outward appearance of cold rolled sheet and its the operational performance.In this paper Sliver defect,cavity and scar/pit,those three commonly encountered surface defects induced by inclusion are discussed and their characteristics and origin des... |
| |
| Keywords: | cold rolled sheet inclusion sliver defect cavity scar/pit |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
