The microstructure of an Fe-Mn-Si-Cr-Ni stainless steel shape memory alloy

The microstructure and phase stability of the Fe-15Mn-7Si-9Cr-5Ni stainless steel shape memory alloy in the temperature range of 600 °C to 1200 °C was investigated using optical and transmission electron microscopy, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), and chemical analysis techniques. The microstructural studies show that an austenite single-phase field exists in the temperature range of 1000 °C to 1100 °C, above 1100 °C, there exists a three-phase field consisting of austenite, δ-ferrite, and the (Fe,Mn)₃Si intermetallic phase; within the temperature range of 700 °C to 1000 °C, a two-phase field consisting of austenite and the Fe₅Ni₃Si₂ type intermetallic phase exists; and below 700 °C, there exists a single austenite phase field. Apart from these equilibrium phases, the austenite grains show the presence of athermal ɛ martensite. The athermal α′ martensite has also been observed for the first time in these stainless steel shape memory alloys and is produced through the γ-ɛ-α′ transformation sequence.