| 宽带钢冷连轧机门户机架辊形设计研究 |
| |
| 引用本文： | 杨光辉,曹建国,张杰,李洪波,米凯夫.宽带钢冷连轧机门户机架辊形设计研究[J].冶金设备,2011(1):5-9,42. |
| |
| 作者姓名： | 杨光辉 曹建国 张杰 李洪波 米凯夫 |
| |
| 作者单位： | 北京科技大学机械工程学院,北京,100083 |
| |
| 基金项目： | 国家自然科学基金项目(59835170) |
| |
| 摘 要： | 利用大型有限元软件Marc建立了轧制过程三维有限元仿真模型,以某1700mm冷连轧机为对象,分析了冷连轧机不同入口厚度和不同架次下的金属横向流动的特点,发现冷连轧机门户机架1#机架带钢厚度最厚、压下量最大,带钢金属横向流动最有条件,为实现凸度和平坦度的解耦创造了基础。提出了一种新的边降控制工作辊辊形即连续变锥度工作辊CVTR（Continuously Variable Taper Roll）,并配套使用VCR（Varying Contact Length Backup Roll）支持辊,提高了轧机的辊缝横向刚度,增强了轧机抵抗轧制力波动而保持不变的能力,为实现板形的良好控制创造了条件。
|
| 关 键 词： | 冷连轧机 带钢 平坦度 有限元法 |
Roll Contour Design of Gate Mill for Wide Strip Cold Tandem Rolling Mills |
| |
| Yang Guanghui,Cao Jianguo,Zhang Jie,Li Hongbo,Mi Kaifu.Roll Contour Design of Gate Mill for Wide Strip Cold Tandem Rolling Mills[J].Metallurgical Equipment,2011(1):5-9,42. |
| |
| Authors: | Yang Guanghui Cao Jianguo Zhang Jie Li Hongbo Mi Kaifu |
| |
| Affiliation: | Yang Guanghui Cao Jianguo Zhang Jie Li Hongbo Mi Kaifu(School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083) |
| |
| Abstract: | A finite element model was established to simulate the rolling process by the Marc software.The metal transverse flowing characteristics were studied for the strip of different entrance thickness and different mill stands of 1700 tandem cold rolling mills.It showed that strip of the gate mill had good transverse flowing characteristics because of its big thickness and reduction,and it provided a good foundation for the decoupling of strip crown and flatness.A new work roll contour was proposed and named as ... |
| |
| Keywords: | Tandem cold rolling mill Strip Flatness Finite element method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
