| Abstract: | An accurate GPC calibration is essential if computer techniques are to be utilized in obtaining the molecular weight distribution and degree of long-chain branching from an intrinsic viscosity and GPC trace of a polymer. The use of the National Bureau of Standards Linear Polyethylene Standard Reference Material, SRM 1475, to calibrate GPC is described. Employing this calibration, the Mark–Houwink relationship for linear polyethylene in 1,2,4-trichlorobenzene was established utilizing narrow molecular weight fractions derived through fractionation of SRM 1475 and other polymers. This Mark–Houwink equation was subsequently employed for the evaluation of high molecular weight fractions which were then used to extend the GPC calibration to the high molecular weight region not covered by SRM 1475. An iterative technique was used to obtain coincidence of the measured intrinsic viscosity and the viscosity calculated from the GPC data. The accuracy of the GPC calibration was demonstrated by obtaining coincidence of the measured and calculated viscosity of high and low molecular weight polymers of both narrow and broad polydispersity. |
