| 前支架多工位级进模设计 |
| |
| 引用本文： | 伍先明,黎安强. 前支架多工位级进模设计[J]. 模具工业, 2003, 0(2): 11-14 |
| |
| 作者姓名： | 伍先明 黎安强 |
| |
| 作者单位： | 1. 湘潭工学院， 湖南湘潭 411201
2. 广东南海华丽金属制品厂有限公司， 广东南海 528200 |
| |
| 摘 要： | 介绍了前支架多工位级进模设计 ,分析了零件的工艺性 ,重点阐述了排样设计 ,确定了模具结构及凸、凹模的镶拼形式
|
| 关 键 词： | 前支架 多工位级进模 排样设计 模具结构 |
| 文章编号： | 1001-2168(2003)02-0011-04 |
| 修稿时间： | 2002-09-10 |
Design of the Multi-Position Progressive Die for the Front Brackets Front Brackets |
| |
| WU Xian_ming ,LI An_qiang. Design of the Multi-Position Progressive Die for the Front Brackets Front Brackets[J]. Die & Mould Industry, 2003, 0(2): 11-14 |
| |
| Authors: | WU Xian_ming LI An_qiang |
| |
| Affiliation: | WU Xian_ming 1,LI An_qiang 2 |
| |
| Abstract: | The design of the multi_position progressive die for the front bracket part was introˉduced.The technological property of the part was analyzed.The layout design was specially stated.The die structure and the inserting and splicing form of the punch and matrix were deˉtermined. |
| |
| Keywords: | front bracket progressive die layout design die structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
